•An SD card or an SDHC card is required.
•Format the card in the IC-7300 before using it for the update. (First, save
any data that is on the card, if necessary.)
• Unzip and save the downloaded firmware file in "IC-7300" folder that is on
the card.
•Save the transceiver-s data onto a separate card before doing the update. It
is possible that your data could get lost or corrupted during the update.
Thoroughly read Section 8 (USING AN SD CARD) of the ¦FULL MANUAL¦ for details.
•Thoroughly read Section 15 (UPDATING THE FIRMWARE) of the ¦FULL MANUAL¦ before
starting the update.
•Never turn OFF the transceiver power during the update.
•The firmware will be updated to the following versions.
Main CPU: 1.13
DSP Program: 1.07
DSP Data: 1.00
FPGA: 1.12