The ALPIN200 is the new 2KW power amplifier for all amateur radio bands from 1.8MHz to 29.7MHz. Like the ALPIN100-MKII before it, it has high quality components, for example Vacuum relays Gigavac, 2.5kVa high voltage transformer and Pope fan down.
2 tubes are used making more power available. Moreover, the ALPIN200 has 2 antenna connectors that can be selected using the front panel button. It has a built-in microprocessor that monitors all important operating data and displays it on the LCD display, it also gives tuning indication which simplifies tuning to a frequency. With this microprocessor the ALPIN200 has a comprehensive protection system available that can prevent damage to the amplifier. This constantly monitors the following parameters in operation and issues corresponding error messages and warnings:
Anode Current, Reflected Power, High Voltage, Fans, Vacuum Relay, G1 & G2 Grid Current, Power Supply, Input Power, RF Anode Voltage & Power, G1 Grid Voltage, Temperature.
Specifications
• Frequency Coverage: All Amateur Radio Bands 1.8 - 29.7 MHz
• Power Output: 2000 Watts CW
• Output Circuit: Pi-L Network with Matching Capability - VSWR up to 3:1 (16-150 Ohms)
• Output Impedance: 50 Ohm Unbalanced
• Input Circuit: Broadband with VSWR less than 1.3:1
• Driving Power: 60 Watts (typical)
• Harmonics: 1.8 - 29.7 MHz > 50dB Below Peak Output
• Intermodulation Distortion: > 35dB Below Peak Output
• RF gain: 15dB
• LCD Display
• Power Supply: 230V AC - 50Hz
• Tube: 2x 4CX800A (GU74B) Ventilated
• Dimensions: (W x D x H) 470mm x 415mm x 190mm
• Weight: 40 kg
